We only sell authentic products from verified brand partners and retail partners globally.
Your cart
Your cart is empty
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Skeleton text
EPCOM POWERLINE
Adapter Supply 12 Vdc Regulated @ 1A ; Input voltage 100-240 Vac
$5.99
12 VDC @ 1.0A 12W Output ±5% Regulated 120mV Ripple 5.5 x 2.1 mm Plug 2.27" x 1.69" x 1.07"
Regulated, not just rectified
A regulated supply holds its output steady as the load changes — important when a camera's IR array switches on and current demand jumps.
| Output tolerance | 12 VDC ±5% |
| Output ripple | 120 mV |
| Efficiency | Greater than 78% |
Protection & status
A wiring mistake shouldn't cost you a camera. Built-in protection shuts down before damage, and the LED tells you instantly whether power is actually reaching the device.
| Over-current | Protected |
| Short circuit | Protected |
| Indicator | Green LED, on when output is live |
Pick the right amperage
Undersizing a supply produces the same symptoms as a bad camera: night-time reboots, flicker, weak IR. Add up your device's draw at full load — with IR on — and leave headroom.
| Model | Output | Typical use |
| PL-DC500 | 12 VDC @ 500 mA | Low-draw devices, small sensors |
| PL-DC-1000 | 12 VDC @ 1.0A | Single camera or single device — the most common choice |
| PSD1202D | 12 VDC @ 2A | Higher-draw cameras, PTZ, extra headroom |
| P12DC3A | 12 VDC @ 3A | Recorders or a device with a heavy peak load |
| PS-12-DC-4C | 12 VDC @ 5A, 4 outputs | Multi-camera sites · adjustable 11–15 VDC for long runs |
Main Features
- Output: 12 VDC @ 1.0A, 12W
- Regulated output, ±5% tolerance
- Output ripple: 120 mV
- Conversion efficiency above 78%
- Over-current protection
- Short-circuit protection
- Constant output voltage regulation
- Green LED power indicator
Electrical
- Input: 100 – 240 VAC, 50/60 Hz
- Input current: 0.5A
- Load loss: 0.1W
- AC input: 2-pin U.S. wall plug
- DC output plug: 5.5 x 2.1 mm
- Also available: 5.5 x 2.5 mm
Physical & Environment
- Dimensions: 2.27" x 1.69" x 1.07"
- Direct wall-plug form factor
- Operating temp: -4°F ~ 113°F
- Operating humidity: 20 – 90% RH
- Storage temp: -13°F ~ 149°F
- Storage humidity: 10 – 95% RH
- Indoor, dry-location use only
Product views
Full specifications
| Input | |
| Input voltage | 100 – 240 VAC, 50/60 Hz |
| Input current | 0.5A |
| AC connection | 2-pin U.S. wall plug (integrated) |
| Load loss | 0.1W |
| Output | |
| Output voltage | 12 VDC regulated, ±5% |
| Output current | 1.0A |
| Output power | 12W |
| Output ripple | 120 mV |
| DC output plug | 5.5 x 2.1 x 11 mm (5.5 x 2.5 x 11 mm also available) |
| Conversion efficiency | Greater than 78% |
| Protection | |
| Over-current | Yes |
| Short circuit | Yes |
| Voltage regulation | Constant output voltage |
| Indicator | Green LED — lit when output is present |
| Physical & Environment | |
| Dimensions | 2.27" x 1.69" x 1.07" (L x W x H) |
| Operating temperature | -4°F ~ 113°F |
| Operating humidity | 20 – 90% RH |
| Storage temperature | -13°F ~ 149°F |
| Storage humidity | 10 – 95% RH |
| Warranty | 1 year with Epcom |
Installation cautions
- Verify input and output wiring is correct before applying power — a reversed connection can damage the connected device.
- Confirm the LED lights after plugging in. If there's no LED and no output, re-check the wiring before assuming the device is faulty.
- Indoor, dry locations only. Do not install where the adapter can be exposed to rain, splashes, or condensation.
- Avoid direct sunlight, high-temperature spots, and dusty environments.
- Keep the outlet accessible — the plug is the disconnect for this device.
The right supply, the first time.
Confirm your device's amperage and barrel size, and your sales rep will match the exact part — no returns, no second trip.
*All pictures and specifications are for reference only and are subject to change without prior notice.
EPCOM POWERLINE
Adapter Supply 12 Vdc Regulated @ 1A ; Input voltage 100-240 Vac
SKU: PL-DC-1000
$5.99
Shipping
calculated at checkout.
The 5W power is great for use in the home whether you want to listen to music after a long day at work or watch a film on your laptop. With its practical integrated strap, you can attach the speaker to a backpack and take it to the park on a sunny spring day.
In stock · 70 pcs
Estimated delivery: 3–7 business days.
Adapter Supply 12 Vdc Regulated @ 1A ; Input voltage 100-240 Vac
$5.99
$5.99
Secure Shipping
We package your products securely.
Warranty
All our products are guaranteed.
12 VDC @ 1.0A 12W Output ±5% Regulated 120mV Ripple 5.5 x 2.1 mm Plug 2.27" x 1.69" x 1.07"
Regulated, not just rectified
A regulated supply holds its output steady as the load changes — important when a camera's IR array switches on and current demand jumps.
| Output tolerance | 12 VDC ±5% |
| Output ripple | 120 mV |
| Efficiency | Greater than 78% |
Protection & status
A wiring mistake shouldn't cost you a camera. Built-in protection shuts down before damage, and the LED tells you instantly whether power is actually reaching the device.
| Over-current | Protected |
| Short circuit | Protected |
| Indicator | Green LED, on when output is live |
Pick the right amperage
Undersizing a supply produces the same symptoms as a bad camera: night-time reboots, flicker, weak IR. Add up your device's draw at full load — with IR on — and leave headroom.
| Model | Output | Typical use |
| PL-DC500 | 12 VDC @ 500 mA | Low-draw devices, small sensors |
| PL-DC-1000 | 12 VDC @ 1.0A | Single camera or single device — the most common choice |
| PSD1202D | 12 VDC @ 2A | Higher-draw cameras, PTZ, extra headroom |
| P12DC3A | 12 VDC @ 3A | Recorders or a device with a heavy peak load |
| PS-12-DC-4C | 12 VDC @ 5A, 4 outputs | Multi-camera sites · adjustable 11–15 VDC for long runs |
Main Features
- Output: 12 VDC @ 1.0A, 12W
- Regulated output, ±5% tolerance
- Output ripple: 120 mV
- Conversion efficiency above 78%
- Over-current protection
- Short-circuit protection
- Constant output voltage regulation
- Green LED power indicator
Electrical
- Input: 100 – 240 VAC, 50/60 Hz
- Input current: 0.5A
- Load loss: 0.1W
- AC input: 2-pin U.S. wall plug
- DC output plug: 5.5 x 2.1 mm
- Also available: 5.5 x 2.5 mm
Physical & Environment
- Dimensions: 2.27" x 1.69" x 1.07"
- Direct wall-plug form factor
- Operating temp: -4°F ~ 113°F
- Operating humidity: 20 – 90% RH
- Storage temp: -13°F ~ 149°F
- Storage humidity: 10 – 95% RH
- Indoor, dry-location use only
Product views
Full specifications
| Input | |
| Input voltage | 100 – 240 VAC, 50/60 Hz |
| Input current | 0.5A |
| AC connection | 2-pin U.S. wall plug (integrated) |
| Load loss | 0.1W |
| Output | |
| Output voltage | 12 VDC regulated, ±5% |
| Output current | 1.0A |
| Output power | 12W |
| Output ripple | 120 mV |
| DC output plug | 5.5 x 2.1 x 11 mm (5.5 x 2.5 x 11 mm also available) |
| Conversion efficiency | Greater than 78% |
| Protection | |
| Over-current | Yes |
| Short circuit | Yes |
| Voltage regulation | Constant output voltage |
| Indicator | Green LED — lit when output is present |
| Physical & Environment | |
| Dimensions | 2.27" x 1.69" x 1.07" (L x W x H) |
| Operating temperature | -4°F ~ 113°F |
| Operating humidity | 20 – 90% RH |
| Storage temperature | -13°F ~ 149°F |
| Storage humidity | 10 – 95% RH |
| Warranty | 1 year with Epcom |
Installation cautions
- Verify input and output wiring is correct before applying power — a reversed connection can damage the connected device.
- Confirm the LED lights after plugging in. If there's no LED and no output, re-check the wiring before assuming the device is faulty.
- Indoor, dry locations only. Do not install where the adapter can be exposed to rain, splashes, or condensation.
- Avoid direct sunlight, high-temperature spots, and dusty environments.
- Keep the outlet accessible — the plug is the disconnect for this device.
The right supply, the first time.
Confirm your device's amperage and barrel size, and your sales rep will match the exact part — no returns, no second trip.
*All pictures and specifications are for reference only and are subject to change without prior notice.
Key Features
Bring home the QE65S90FATXXU and experience cinema-quality visuals, immersive sound, and next-gen AI enhancements – all in an elegant, slim design built for the future of home entertainment.
- NQ4 AI Gen3 Processor with 128 neural networks
- 4K AI Upscaling Pro for sharper detail
- OLED HDR+ for breathtaking brightness and depth
- AI Motion Enhancer Pro for smooth, clear action
- Dolby Atmos® immersive surround sound
- Ultra-slim LaserSlim design with minimal bezels
- Object Tracking Sound for realistic sound placement
- Motion Xcelerator 144Hz with VRR/4K@120Hz support
- Pantone® Validated colour accuracy
-
Features
custom.type -
Speakers
2.1CH -
Type of Antenna
Terrestrial & Satellite -
USB Recording
Yes
-
Design Elements
-
Colour
Graphite Black -
Colour Group
Black
-
Connectivity
-
Bluetooth
Yes -
HDMI
Yes -
Number of HDMI Ports
4 -
Number of USB Ports
2 -
Smart Connect
Yes -
Smart TV
Yes -
USB
Yes -
Wi-Fi
Yes
-
Dimensions & Weight
-
Depth
3.99 cm -
Depth with Stand
26.52 cm -
Height
83.17 cm -
Height with Stand
89.67 cm -
Shipping Depth
16 cm -
Shipping Height
95 cm -
Shipping Weight
29.9 kg -
Shipping Width
151.7 cm -
Weight
21.2 kg -
Width
144.43 cm -
Width with Stand
144.43 cm
Read more
Authencity Guaranteed
- Choosing a selection results in a full page refresh.
- Opens in a new window.