This 20 ft (6.09 m) chain section is designed for adding length or replacing existing chain in compatible DKS sliding gate operator installations. It utilizes standard #40 roller chain, a common industrial specification that ensures reliable power transmission between the motor drive sprocket and the gate carriage. Proper chain tension and alignment are critical for smooth operation and extended service life in continuous-duty access control applications.

Main Features

• 20 ft (6.09 m) length for extended gate travel applications
• Standard #40 roller chain for industrial power transmission
• For use with compatible DKS sliding gate operators
• Replacement or extension of existing chain installations

Specifications

Note: Before purchasing the chain, check the compatibility in the installation manual of your sliding door motor.

Typical applications: Commercial and residential sliding gate systems requiring chain replacement or extended travel distance.

Where does it fit?

Rated for gates up to 1,764 lb (800 kg), the XBS-CAN-AC-800(C) covers everyday residential use and steps up to light-commercial and industrial entrances.

Requires & optional accessories

The steel roller chain is sold separately — quantity depends on your gate length. Add these AccessPRO accessories to round out the installation.

*The estimated gate weight includes the gate leaf plus its hardware. The system supports a maximum of 5 wireless remotes (one button per remote). For more remotes, add an XB-REC2 wireless receiver (400 remotes per receiver maximum).

Dimensions

Overall footprint approx. 16.8 in L × 7.6 in W × 12.7 in H. Weight: 33 lb.

Full specifications

Specifications sourced from the manufacturer's official datasheet. The working-environment range shown here corrects an evident misprint in that document (originally listed as -184°F). Subject to change without notice — please refer to the actual product received.

See it in action

Charger for TX350BAT Battery

The TX350CRG is a charger designed for the TX350BAT battery. It operates with a 20V/3.5A output that enables reduced charging times. The integrated circuit features automatic detection of optimal voltage and current based on the connected battery's state. The unit includes protection against overheating and short circuits to preserve both the charger and the battery. LED indicators provide visual feedback of real-time charging status. The design incorporates enhanced ventilation for thermal dissipation during extended operation.

Main Features

• Fast charge output 20V/3.5A
• Compatibility with Li-ion batteries from 14.4V to 25.2V
• Automatic detection of optimal voltage and current
• Protection against overheating and short circuits
• LED indicators for real-time charging status
• Enhanced ventilation for thermal dissipation

Typical applications: charging TX350BAT batteries in mobile work environments, maintenance of portable equipment with Li-ion batteries in the 14.4V to 25.2V range.

Clip for Uni-channel Installation

Fastening clip designed for uni-channel installation on wire mesh cable trays. Manufactured in spring steel enabling tool-free attachment without screws. The pressure-lock mechanism secures channel retention without damaging the tray structure. Recommended exclusively for horizontal cable runs. Compliant with international safety standards for electrical and telecommunications installations.

Main Features

• Screwless design for wire mesh trays
• Tool-free quick installation
• Spring steel for extended durability
• Compatible with international safety standards
• Recommended for horizontal pathways only
• Secure retention without tray damage

Installation example:

Typical applications: Data centers, network equipment rooms, industrial installations with wire mesh trays for structured cabling routing.

Cloud Easy Smart 250m

PoE Switch for CCTV

Extend your network distance to 250m

Dip Switch provides extended mode. Break the distance limit, flexibly deploy your network device.

When the camera is offline, users can remotely restart the PoE port on the cloud platform

Real-time network status monitoring and remote configuration

Unique value for CCTV network

Discovering ONVIF IP camera and managing devices through Wi-Tek Cloud Platform/Mobile APP for free anytime, anywhere, making the maintenance easier.

Connector RJ45 for UTP Category 6A

This RJ45 connector is designed for unshielded twisted pair (UTP) Category 6A cable installations. It supports 23 AWG conductors commonly used in structured cabling systems for Gigabit Ethernet and 10 Gigabit Ethernet networks. The unshielded design makes it suitable for indoor environments where electromagnetic interference is minimal. This connector is intended for use in data network cabling projects requiring Cat6A performance levels. The package contains 100 units to accommodate medium to large-scale installations.

Main Features

• RJ45 connector for UTP Cat6A cable
• Compatible with 23 AWG conductor size
• Unshielded design for indoor environments
• Supports high-speed data network applications
• Pack of 100 pieces for project deployment

Typical applications: Structured cabling in commercial buildings, data center patch cord assembly, and enterprise network infrastructure installations.

Desktop charger designed for the TXBP-298 Li-Ion battery pack with 2250 mAh capacity. Equipment oriented to portable radios in the IC-F3003, IC-F4003, IC-F4003H and ICV86 series. Provides a 16-hour charge cycle that delivers approximately 8 hours of continuous operation. Incorporates multicolor LED indicators for real-time visual monitoring of charge status. The desktop design allows fixed installation at communication workstations.

Main Features

• Compatible with 2250 mAh Li-Ion TXBP-298 battery pack
• Supports ICOM IC-F3003, IC-F4003, IC-F4003H and ICV86 radios
• 16-hour charge cycle for approximately 8 hours of operation
• Multicolor LED indicators for real-time charge status
• Integrated protections: overvoltage, temperature and charge time
• Compact desktop design for fixed installation

Typical applications: control centers, dispatch stations, private security operations and portable radio fleet maintenance.

TX-KSC43 Desktop Charger

The TX-KSC43 desktop charger is a rapid-charge device with dual-chemistry compatibility for portable radio batteries. It operates with nickel-metal hydride (Ni-MH) and lithium-ion (Li-Ion) batteries, enabling use in fleets with different power technologies. Its desktop design facilitates charge management at fixed operation bases, maintenance centers, and dispatch points. The charger serves as a functional alternative to KSC-31 and KSC-43K models, maintaining compatibility with KNB29N, KNB45L, KNB63L, KNB65L, and KNB69L battery series.

Main Features

• Dual chemistry compatibility: Ni-MH and Li-Ion batteries
• Rapid charging to minimize downtime
• Compatible with KNB29N, KNB45L, KNB63L, KNB65L, KNB69L batteries
• Alternative for KSC-31 and KSC-43K chargers
• Desktop design for fixed installation

Typical applications: Fleet control centers, radio dispatch rooms, communication equipment maintenance workshops, and operations requiring continuous battery rotation with multiple chemistries.

Magnetic Contact Switch for Doors and Windows

This magnetic contact switch consists of a reed switch and a magnet that function as a normally closed (NC) circuit while the magnetic field is present. When the door or window opens, the electrical circuit breaks, enabling detection of the opening event. The ultra-compact design allows discreet installation within standard frames. The unit operates at 12 VDC with a 0.5 A rating, compatible with standard alarm panels, access control systems, and video surveillance integrations. Leads are supplied as 24 AWG wire with 18" (45.7 cm) length for flexible wiring runs.

Main Features

• 13 mm gap for precise opening detection
• Normally closed reed switch for instant response
• Ultra-compact 17 x 8 x 4 mm (0.66 x 0.31 x 0.15") dimensions
• 12 VDC, 0.5 A operation compatible with standard panels
• 24 AWG leads with 18" (45.7 cm) wire length
• Suitable for alarm, access control, and surveillance systems

Typical applications: residential and commercial intrusion detection systems, door and window monitoring in access control installations, perimeter security integration with alarm panels and video management systems.